How to Add a Person to a Group Photo in Photoshop

There are times when you may wind up with nearly ideal photographs, but for the absence of a specific individual, you want to be in them. Adding a person to a group photo in photoshop is simple.

An image editor such as Adobe Photoshop allows you to add a person to photoshop rather than attempting to get everyone back in the exact location to recreate the picture with everyone you want.

Now the actual question is, how to add a person to a group photo in photoshop? If you follow a few simple steps, you may quickly and easily learn how to add a person to an image in Photoshop.

Step 1 – Select your picture from the gallery.

When attempting to add a missing person to a photo, you must first ensure that you have a photograph of the missing person corresponding to the picture you want to include them in.

You should try to locate a photograph of the person against a plain or straightforward backdrop if at all possible. More effort may be required when erasing a busy background, so choose your background with caution.

You want the image of the person you are adding to be the same size or more significant than the picture of the person you are adding them to. If you have to expand the person you are adding to the image, they will become pixelated, negating all of your efforts to make them seem like they belong in the photograph.

If you have to expand the person you are adding to the image, they will become pixelated, negating all of your efforts to make them seem like they belong in the photograph.

Make an effort to match the color tone and light; if you are all on a beach, attempt to locate one of your friends basking in the sun. You will be able to alter the colors in the future. However, it will be more challenging to deal with in the future.

Step 2 – Select the lasso tool from the toolbar in photoshop.

Choose a person from the list. To cut out the figure’s background, you must first open the snapshot of the figure in Photoshop. Next, select the Lasso Tool from the toolbar in photoshop.

The lassoed rope icon, the third icon down from the top of the side toolbar, will serve as a shortcut to this feature. Begin at a point close to your figure and loop around your figure many times while holding down the left mouse button.

When you’ve drawn around the person, the lines you’ve drawn will become highlight lines, which are dashed and move lines around the perimeter of the person’s body that you’ve drawn in the beginning. You are not required to be highly accurate; nonetheless, you must be careful.

Step 3 – Copy and paste the edited picture to your group photo.

Your figure has been highlighted, and you must copy the cut-out person’s image to add the person to a group photo in photoshop. At the top of the screen, select the Edit menu option from the drop-down menu.

You will be able to copy from the pull-down menu. You will now need to open the group photo that you took earlier. Once it is open, please select the image by clicking on it.

Then, return to the Edit menu and select Paste from the pull-down menu that appears. This will copy and paste the figure you highlighted from the original image into the chosen group image.

When utilizing the control (or command on a Mac) button with the C button to copy, you can avoid having to navigate through a menu bar entirely. This will also copy the image to your hard drive. To paste, press the ctrl (or command) key and V.

Step 4 – Adjust the size of the image.

Since you have added the person to photoshop, you must adjust it to ensure that it is proportional to the group’s other members. Through the usage of the Free Transform tool, you will be able to adjust the size of the image. Then, in the Layers window, locate the figure layer and pick it.

The Layer window is usually located on the right-hand side of your workspace. Once the figure layer has been selected, go to the Edit menu option and select Free Transform from the drop-down menu. There will be a box visible on the exterior of your layer.

When you click on the corner of the box with the shift key held down, drag the box inward to make the figure smaller by holding the shift key.

Continue to decrease the figure until it appears to be around the same size as the others in the group shot. Please make sure you keep the shift key pressed. In this case, you will not be able to change the figure’s proportions in the photo.

Instead of selecting the Free Transform tool from the menu bar, you can choose it by pressing the ctrl (or command) and the T button simultaneously.

Step 5 – Remove the other backdrop by erasing it.

Remove the original backdrop from surrounding the figure to make the figure appear to be a part of the image. Again, you’ll need the Eraser tool for this. To begin, open the layer window and choose the figure layer. The mask layer button is a grey rectangle with a white circle in the middle located at the bottom of the layer window.

To isolate the image from the other layers, click on it. Then, select the eraser tool on the left toolbar, located approximately halfway down the bar and has a rectangle eraser on it. There are eraser options at the top of the screen.

By dragging the arrow over or putting in the new size, alter the brush size to roughly 60 or 70 pixels by clicking the down arrow. Also, at the bottom of the menu, adjust the hardness to 0. You may now remove the majority of the extra backdrop from surrounding your figure.

Always get closer to the figure as possible without erasing any of it. With a smaller brush, the excess portions around their bodies are likely to be eliminated.

You can use the magic wand tool to isolate and erase the background if they are on white or solid color background. First, choose the background color using the magic wand tool, then press delete once everything is highlighted.

Step 6 – Isolate the image.

After you’ve removed most of the backdrop, you’ll need to finish eliminating the remaining background to isolate the figure. Next, change the size of your brush in your eraser settings at the top to somewhere between 20 and 30 pixels.

You need to increase the hardness to at least 50. When you’ve finished using your eraser, use the + symbol or the percentage slider at the bottom of your window to zoom in on the image. Close your eyes as much as possible, allowing you to see the figure’s edges. Remove the rest of the figure’s background.

If you mistake or mistakenly erase a portion of the figure, press the undo button on the Edit menu bar.

Step 7 – Match the Person to the photo by moving the layer.

Since your figure is the same size as the rest of the squad, you must drag the layer to the desired position. Again, make sure the isolated person’s layer is selected before proceeding.

On the left side of the screen, click the move tool located at the top of the toolbar. After you’ve clicked it, grab the isolated person’s layer and drag it to the desired location while holding down the left mouse button.

Step 8 – Make a lighting change.

You must match the color of the figures now that they are the same size. With the figure layer chosen, go to the bottom of the layer screen and click the icon next to the mask button. On it is a bi-color circle. A menu screen will appear when you click it.

When you select the Curves option, a dialog box will appear. It will be a square with a diagonal line running through it. Click on the middle line, halfway up the centerline, and halfway down the centerline.

You can move the line by clicking on each of the dots that appear. Experiment with the levels in this option. As you move the bars up and down, you may add and subtract light and contrast. Play with the layer until it looks the same as the group layer.

If the difference between the layers is only slight, you can adjust the brightness and contrast from the Image menu bar. Just move the lines back and forth.

When you try to create a Curves layer on your figure, a dialog window may appear. To make the Curves mask layer, press OK when it appears.

The lighting of the original group photo can also need to be altered. If you wish to modify it, go to the backdrop layer and select the same icon from the bottom of the screen, then repeat the process with the figure layer until the two layers are nearly identical.

Related: How to Add a Person to a Photo Without Photoshop

Step 9 – Match the color scheme.

Since the lighting on your figure is perfect, you’ll need to match the skin tones. Make sure your figure layer is selected before proceeding. Choose Hue/Saturation from the menu by pressing the same bi-color circle at the bottom of the layer screen.

Hue, Saturation, and Brightness can all be adjusted from the screen. Hue will change the color of the highlight and lowlight colors. Saturation alters the intensity of colors on your screen, making them brighter or duller.

The brightness of the figure will modify its overall lightness. Therefore, you should fiddle with the settings until the figure matches the group’s hue.

Watch the Video Tutorial to Get Easy Processes

Final Word

Using photoshop elements, you can add a person to a photo. The process of adding a person to a group photo in photoshop might seem a little complicated at first, but as you go with it, it will seem much more manageable. However, there are needed more effects to make the photo looking better if we using retouching and photo enhancing works. After following this guide you can add your missing person easily, moreover, you might be needed some retouching service to make them more realistic.